NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)

- - Carb parts for sale (http://www.njfboa.org/forums/showthread.php?t=36978)

Carb parts for sale

All of this stuff is new or very close to new with LESS than 700 miles on it, i decided to go a different direction with my motor and switch to TPI so all of the carb stuff has to go:

Black ‘Chevrolet’ air cleaner with 3in k&n air filter and bowtie nut - $60 SOLD

Demon road demon carb 625 cfm, stock jets, has 400 miles on it, with dual feed line, vacuum secondaries - $250

1” carb spacer adapter spread bore to square bore -$10 SOLD

Tall plain chrome valve covers perimeter bolts very clean no scratches -$20

Generic aluminum Dual plane intake manifold -$40

Black 100 amp Alternator V-belt, one wire, works great only 2000 miles on it - $75

Chrome alternator brackets for 86 style sbc - $10

Aluminum water pump pulley, needs a little cleaning but overall great shape, v- belt -$10

V-belt Chrome Crank pulley - $10

Brand new 2 groove v-belt Power steering pulley has maybe 300 miles on it press on style - $10

305 heads, off early- mid 80’s 305, freshly rebuilt, they have maybe 1k on them after rebuilt, they do NOT smoke - $100

Crane Cams Gold 1.6, 1.5 roller rocker arms about 20k on them, they work fine, no ticking or visible damage - $150

Chrome Water neck early style for v-belt very clean no scratches - $10

GM HEI stand alone Dizzy recently tested by professional shop and passed, new vac advance mechanism, accel ignition chip included - $50

New stock Carter mechanical fuel pump self regulated at 6 psi, no return, - $25

Carb throttle cable and bracket - $15 SOLD

Holley 600 CFM spread bore Carb, vac seconds, comes with remainder of rebuild kit - $50

Local pickup is prefered, but can work with buyer for shipping. Thanks

i want to add a SBC 350, has rotating assembly still installed, needs machine work, the bearings on the crank are bad, its 4 bolt mains, 10066036 i believe off the top of my head is the casting number. would like to get $100 for it, open for offers. will try to get pics this week.

replied.

all parts located in southern sussex county for future reference.

havent had this up top in a while

Still got the 600cfm holley? Does it need to be rebuilt? Im looking for a cheap carb to see if the problem with my motor is my 750 being to big for my car or not.

yeah i still have it. I did rebuild it a few years ago...used it for about 3 months then replaced it with the demon and its been sitting in my garage for a few years now. as far as i know it should be ok, its just old and cosmetically doesnt look good.

Still have it all, open for offers, need this stuff gone

still got them, open for offers!