Bet my coil is bigger than yours!
 

But not a clue where to stick it.
http://www.facebook.com/album.php?ai...&id=1113366798
Any ideas?

Why not where it belongs on the front of the cylinder head?

Its not a stock, and inheirantly won't tango with the ICM.

Why go to a different coil? Why not just keep the stock one?

throw the battery in the back and mount it up nicely over there with your msd box. that or somewhere off the driver fender. whats wrong with on the intake?

It came with the MSD box, and I think the stock coil is on its way out. Kinda falls apart at higher rpms, and its not the opti.

relocate the alternator to where the ac compressor would be and mount it right there!

No way! I need my AC compressor for looks!

There are a few unused bolt holes in the block below the head. You could either build a bracket for the ICM or the coil and mount it down there.

Might want to also add another ground strap to the bolt on the coil to the ICM mount too.

napa has an a/c bypass pulley for 40 bucks, plastic pulley though :lol: i'll let you know how it fits

Well maybe I will do the battery relo and stick it there. Who knows.

i would recommend a vented battery too, don't want you driving all silly now. i would have done it already but i don't feel like running wires and don't want to rig it. thats next after the opti

I can get a huge ass 31 and stick it back there.... hmmmm. And do your damn opti. Its fun. I swear.

its a slow work week. maybe tomorrow? nah, i won't make fridays

I am sure Al would understand....:mrgreen:

Just remember that if you relocate the batt. and you plan to take the car to the track, then you'll need to make it NHRA compliant.

NHRA cert. batt box, car shutoff switch, proper grounds etc. Allot of money and effort just to mount a coil. Plus I'd perfer the coil close to the dist. so the coil wire is short and delivering a nice hot spark with less change of arcing.

This whole car is a lot of money to accomplish something trivial but thats the fun of it. And I don't drag race, nor do I intend to. And this weekends project is trying to get the ICM and this coil to play nice by the head. We shall see.