WTB SBC parts
 

Carb preferably a 750 holley (willing to trade holley 670)
heads with at least 2.02 intake valves and less than 72 CC chambers (23*)
1.6 or higher rockers
high volume fuel pump (mechanical)
single plane intake

I got the heads from my motor their 200cc/72 cc dart iron eagle heads with 202 valves
http://store.summitracing.com/partdetail.asp?autofilter=1&part=DRT%2D10421112P&N =700+309283+4294784545+4294840140+4294867028+42947 91969+4294867001+4294867022+115&autoview=sku

The carb is a completely rebuilt holley 750 vacuum secondary carb with quick change spring kit comp max jets blue gaskets new power valves and all and ill throw in the dual fuel line kit with gauge and filter for it

I also have a holley 110 gph polished high flow fuel pump.
http://store.summitracing.com/partde...5&autoview=sku

heads 750 obo
carb 200
fuel pump 50
950 if you buy all three

The heads alone are 1200 new plus shipping from summit.

oh yea i got a edelbrock performer rpm intake too
50

i have a holley 750

My buddy is selling a used set of these but the only thing is that they are bare....


http://store.summitracing.com/partde...5&autoview=sku


He started to port one and he will finish the other one for $300 or as they are for $200...

i got heads...
i got a mechanical holley 120gph fuel pump...
single plane intake on that setup? what do you plan on spinning this thing to being a single plane starts making power from 3500 rpm - 8500 rpm on a sbc...

I have a Edelbrock Torquer 2 for SBC 2500-6500 single plane $60 8-)

383/396 stroker probably around 7000 redline