NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Restorations, Fabrication, Tool and Shop Tech (http://www.njfboa.org/forums/forumdisplay.php?f=53)
-   -   93 bird window (http://www.njfboa.org/forums/showthread.php?t=39802)

Firebird67dude 12-24-2008 10:58 PM

93 bird window
 
There is a metel plate thingy that bolts to the window on my car. On this plate thingy there is like a know sticking out with a wheel that goes up and down the rear track so the window can go up and down. Well that tap broke and i can move my window back and forth 6 inches or so while its down. If i can, where can i purchase this plate? Or do u think i could get it welded on?


Thanks,
Tim

sweetbmxrider 12-25-2008 09:21 AM

not sure exactly what you are describing. sounds like the regulator possibly? i would check around junkyards or for someone parting out a car. if you can take a pic, i could definitely verify it.

miketa95 12-25-2008 03:14 PM

I just took my old door apart, if you have a picture of exactly what you're talking about I probably have the part.

Firebird67dude 12-25-2008 09:49 PM

its the metal part that is bolted to the bottom of the back of the window.

miketa95 12-26-2008 12:51 AM

The metal piece that is about a foot and a half long and that holds the window?

Pampered-Z 12-26-2008 08:51 AM

Never had any luck fixing them. I tried welding one and it just ripped apart again. They weren't that much money.

FBODS4EVER 12-26-2008 11:10 PM

i had one break on my thirdgen. pontiac dealer has them for like 20 bucks.


All times are GMT -5. The time now is 12:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.