NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   intake swap? (http://www.njfboa.org/forums/showthread.php?t=40809)

emolineaux 02-01-2009 12:23 PM

intake swap?
 
hey guys i know its a ford question but i figured someone might know. i just got a 92 full size bronco with the fuel injected 5.0 can i swap my intake manifold with a cobra one off a stang?

Mike 02-01-2009 03:02 PM

sits and waits for matt....................oh and if so you could use one from an explorer to save money

camaros_4life34 02-07-2009 03:50 AM

ill have to verify with my cousin hes a ford fenatic but i do believe you can

NJ Torque 02-07-2009 12:01 PM

Yes.

camaros_4life34 02-07-2009 04:59 PM

do you know what block you have is it a windsor

NastyEllEssWon 02-08-2009 01:48 AM

yeah i heard the explorer intake flows as well as the cobra one. someone posted a chart on this awhile back. ::sits and waits for it::

emolineaux 02-08-2009 11:34 AM

yea its a 302 windsor.

camaros_4life34 02-08-2009 10:33 PM

ok if this is what my cousin told me if you have the windsor it will not work b/c the block is higher and wider then just a regular 302 he told me u need to get i believe he said a lightning intake kit ill verify that with him and get all the details and pm you if youd like

Blacdout96 02-09-2009 08:53 PM

also see while your grabbing that intake to grab the explorer heads as well, they are GT40 heads on certain year explorers.

http://www.ford-trucks.com/forums/57...t40-heads.html

GP99GT 02-10-2009 09:09 PM

okie dokie...its a 302 HO. not a "windsor" block, its the windsor family of motors though.

as long as its a 302 you can swap on the GT40/cobra/explorer upper&lower intake, and also the GT40 heads will drop right on. GT40"P" heads have a different spark plug angle and can cause problems with certain headers and/or spark plug wires/routing

the intake is good for a decent gain in HP, and youll have a slightly higher powerband. keep in mind that the throttle body opening on these intakes is also larger (65mm i believe) so a step up in throttle body size would help a little too, or if you stick witht he stock one do a little blending on the intake to match the TB.

Also, on the explorer intake. It doesnt have the hole in the #5 runner for the intake air temp sensor, but that can be drilled and tapped easily. just keep that in mind

oh and yes, the explorer/GT40/cobra intakes all have VERY similar flow numbers, all were dyno tested back to back and were within a few HP/TQ of each other through the powerband. If you have the extra cash ditch the stock E7 heads and get the GT40, maybe along with some 1.7 rockers if youre feeling adventurous

annnnnnnnd also keep in mind your EGR setup when purchasing a new intake, not sure how it is on the trucks but its internal in most of the intakes


All times are GMT -5. The time now is 09:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.