Stuff for sale...
 

Everything is located in Edison NJ... Can be picked up, or can meet relitivly close, or Work in Somerset

Ported LS1 Aluminum weiand intake, TB opening/ports have been cleaned/ported. Currently painted red $250

Set of Camaro "export" taillights $225

Set of 4 painted Z28 16x8 "Snowflake" wheels with new 245/50/16 Kumhos... Minor curb damage, nothing major. $350

Pair of 17x9 Gray painted ZR1 wheels, one wheel has slight scuffing, tires are since gone. $125

93-97 TA headlight housings that accept H4 style bulbs. $25

Have Two (2) Stock LS1 airboxes/lids $5 each

Full set of "saddle" tan G body front bucket seats and rear bench, no cuts, but is dirty $100 for all

Summit Hi-Flow SBC water pump "long" style, just bolted on a motor, never ran $20

GMPP Flat tappet 212/224 cam with matching lifters, had it in my 350, made good power, took out for something larger - $60

Chrome regal front bumper 83-87 w/marker lights $20

Set of weld prostars for 4th gen 15x3.5 with open mcgard lugs and spacers, newer radial tires $350

UMI tubular LCA's for a 4th gen(possible other fitment?) Red, NIB $80

UMI Tubular Panhard bar for 4th gen(possible other fitment?) Red, NIB $70

Autometer "C2" series 2 1/16 mech. water temp and oil pressure guages installed with lights only... never 'hooked' up $100 for the set

Clear 4th gen rear sidemarkers $35

Stock 98 Camaro 28# injectors set of 8 $30

Stock 98 Camaro cam $30

90 MM bluemaxx TB with hardware no sensors $340

Borla adjustable catback for 98+ with quad tips. Cut over the zxle and tips cut... $350

6LE C5 front brake conversion for 98+... new d/s rotors, brackets and pads $525

Thanks...

What's the PN on the Summit pump? Is it bare cast iron or does it have a finish on it?

Billy, thats a good question. I'll look at it and let you know. Its got either black paint or powdercoat from summit.

is the panhard and lca's adjustable at all? what type of ends are on the lca's?

Non adju. UMI P/N's

2020 / 2015

Might be interested in the intake if its still hanging around payday

PM sent long time ago...

Al, Can't read the PM's sent on here... email - baranychris@yahoo.com or text 732-535-2162

Can you get pics of the G Body seats? My brother has been looking for a set of buckets for his Malibu.

- Justin

if u still have
 

the injectors call me6093860522 Rich

interested in PHB and LCA let me know if u still got...

Did you sell the water pump?

Sent another email....waiting for reply.

LCAs still f/s? any pics?