NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Brake, Chassis and Suspension Tech (http://www.njfboa.org/forums/forumdisplay.php?f=28)

- - front spindles (http://www.njfboa.org/forums/showthread.php?t=42692)

kaoskreater94

03-29-2009 06:55 PM

front spindles

would I be able to swap the front spindles of my 91 z28 with the front spindles from a 4th gen camaro. i want to get rid of the hub assembly that i have and go with the style that my brothers 94 has. i need to know if it would be a direct bolt in, eventho the steering set up is different.

//<86TA>\\

03-29-2009 07:35 PM

no, they are totally different.

if your wanting the later-model brakes, they can be adapted to your car with some work, they require spindle modification, turning down your stock rotors into hubs on which the 4th gen rotor will slid over, and an adapter bracket for the 4th gen calipers.

All times are GMT -5. The time now is 02:35 AM.