![]() |
cammed ls1 on interstate?
well im going to be getting a motor put in my z hopefully very soon. while the newer motor is still out of my car i was thinking about having josh throw my asa cam in there.
any idea how the car would run with this cam if i were to take it from jersey to sc and back when i go on vacation? here are the specs. Duration @ 0.050" (I/E) : 226/236 Lift (I/E) : 0.525"/0.525" Lobe Separation : 110 RPM Range : 2500 - 6500 Cam Type : Hydraulic Roller also any idea what the stock push rod length on a 2002 ls1 from a z28 is? |
that cam is much smaller then mine, and my car loves highway... cruise @ 70 MPH no problems....still getting decent milage(180 to a tank) with around town and wot passes
|
You'd be fine with that cam on the highway provided the tune is on...it's a decent sized cam but by no means huge...at least not in my opinion.
Ask Josh, he'd know too(obviously lol) |
You'll be fine w/ that cam.
|
i have a much bigger cam w/o a real tune, it loves the highway... town, not so much
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.