Feeler: Shot LS1
 

well i just figured i would see if anyone might be interested in an ls1 long block minus the oil pan and pickup tube, and windage tray.

its out of my 98 z i dont know the extent of internal damage. i hope to have the motor out this weekend. once i do ill pull the heads and get some pictures up.

$400 obo depending on extent of damage i know pistons are a must lol. and at least 1 cylinder needs a resleeve. motor had 13k on it.

what happened to it?

something got down into one of the cylinders and that was that. not sure what it was but i had fragments of piston and piston ring in my intake manifold.

im interested in the short block possibly, no heads needed. please let me know once you pop it open.

well i didnt get it out this weekend. but i did go to drain the oil. and um yea. nothing but coolant came out. so i doubt this thing is even worth it. might just be going to scrap

if you decide to scrap it, let me know..i'd still give you a couple bucks for it for mock up purposes in my lemans, be alot easier to use a bare ls1 shortblock then my complete lq9

well it needs to be sent out for a resleeve. im selling this basically for the cam crank and block.

$400 takes it or ill trade for a set of 4th gen f body wheels (15s or 17s)

what cam is in it?

stock 98 cam.

well i just found that the water jacket for that cylinder is broke. so im selling the block as a mockup block.

im also selling the crank and cam, and covers if anyone is interested.

I am interested in the front and rear covers