NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Lounge (http://www.njfboa.org/forums/forumdisplay.php?f=26)

- - I need to know the length of... (http://www.njfboa.org/forums/showthread.php?t=47057)

Teds89IROC

09-24-2009 10:19 PM

I need to know the length of...

torque arm bolts... It's late and I'm going to bed. I did a quick search on TGO/google and all I got was 9/16 for the size. Anybody happen to know so I don't have to take one off the car before I can get new ones?

Thanks

PolarBear

09-25-2009 02:46 PM

Spohn has them here

Teds89IROC

09-25-2009 04:41 PM

That's where I found the 9/16 size, they don't mention the length. I can buy grade 8 bolts at my local auto parts store...that's the point

ryanfx

09-25-2009 04:57 PM

giggity

transmaro93

09-25-2009 06:33 PM

mine stock for a 97 lt1 formula i believe should be the same are... as follows

from the top of the head of the bolt to the tip is 7 1/2 inches

from the bottom of the washer to the tip is 7 inches... hope this helps...

deadtrend1

09-25-2009 07:13 PM

Quote:

Originally Posted by ryanfx (Post 639012)

giggity

hehh hehh .. o'right!

Teds89IROC

09-26-2009 12:38 AM

Quote:

Originally Posted by transmaro93 (Post 639021)

I have a 3.42 10-bolt from a 4th gen in the car so it is the same. Exactly what I needed, thank you.

All times are GMT -5. The time now is 02:39 PM.