need quick info
 

is this piece called the crossmember? the black cross bar that the picture shows being bolted.

http://v8tvshow.com/images/stories/T...802%5b1%5d.jpg

does anyone know the bolt size and torque for that?

i am assuming the center bolt is the transmission mount?



lastly, where is the stock tunnel brace located in relation to this? i cant get under my car at the momment and its near impossible to see anything without jacks anyway so...

yes it is. not sure the size and torque for something like that is 'enough'. I've never put a torque wrench on a crossmember bolt.

yes, that is the trans mount.

not sure what you mean by tunnel brace.

10 x 1.50 thread pitch , 1 3/4" - 1 7/8" long @ 37ftlbs

tunnel brace should be roughly a foot back from the crossmember and have 4 short bolts in it. the underbody will have 2 retangular stands that are welded to body that the brace bolts to

perfect... thanks sj! off to find repacements.

what you need, just the bolts?
hardware store have them
or i got them if you feel like taking a ride o barnegat

yea pepboys, autozone and home depot didnt have em so i ordered online from boltdepot.com. home.d probably had them but the one near me is run by monkeys... the drawers of bolts looked like they were organized by a blind chinese man with parkinsons.

better off at a local hardware store next time. the one by me had exactly what i needed when both lowes and the depot failed me.

my worries now are if the old bolt is still in place... and just the head popped. meh... worry about that later.

http://www.fastenal.com

There is one by you in Eatontown.

yeah..... fastenal they got everything & then some.
good call w.b.

sj got the next challenge for you... same info but for tunnel brace... size/thread/length/torque?

ok...... well i know they are 5/8" long and torqued to 24ftlbs
they are either 8x1.25 thread or 10x1.50 thread.
maybe someone else here is 100% sure on the thread/pitch.

i don't have all the answers but most !!! lmao

Do you need the brace or just the bolts? I think I have a stock one somewhere? or you can upgrade to an aftermarket unit that has a DS loop.

nah I wanna replace stock ones that rusted and snapped in