Cam Only LS1 6th Fastest
 

Ran a new best today in the car, the best run was at 12:43 pm with a DA of -500.
60' 1.367
330 4.211
1/8 6.573
mph 103.09
1000 8.633
1/4 10.381
mph 129.32

Will have a video up shortly. Atco is one of the nicest racing facilities in the Northeast, if not the nicest. If anyone can get into one of there rentals I highly recommend it. For those who don't know it is a trex cam in a stock 2001 motor (241 heads) with a th350. I think the mile per hour impressed me more then the time. We'll be back down in december to see what it does in -2000 DA :)

Bone stock motor with just a Cam?

What converter? what does the tin can weigh?

8" ATI converter with 4500 stall. The motor is Cam only just like it says. The raceweight is 3100 lbs. Still has: stock glass,upper and lower control arms, brake master cylinders, steering rack. The car has come a long way to say the least.

very, very impressive!

very nice, congrats on that pass. and sweet drifter above my comment

and one hell of a driver LOL

what gears?

That is amazing for 241 castings. congrats! Are the heads milled at all to bump compression? If so I guess you flycut?

4.56's with a 30" tire
They are bone stock 241 heads. No need to flycut because the heads are not milled even run a stock gm mls head gasket.

Unmilled heads make that even more impressive. Time to update your sig!

so the bone stock motor with 241s and just a cam only makes around 523.25 horsepower at the rear wheel?

you guys running stock injectors? fuel rails? fuel pump?

If you want to doubt it put ur money were ur mouth is and we will pull it apart for you.
42lb injectors. stock rails , 255 intake pump

Hmm 42# injectors takin you that far... good stuff... gives me some hope :]

did you dyno the car? i know people with a lot more then what you go in that motor and they make no where near those numbers you make....

Looks like you know how to type numbers into the horsepower calculator LOL So what are you trying to say? You know people who have a lot more and don't run a better number? Bring me a set of 241 heads and a $1000 I promise you, you will lose your money. Then I will put lexan in the car and drop 100 lbs and run even faster.

yea the calculator dont lie..... you spraying this car?

LOL

if they were spraying... it wouldnt be cam only :idea:

??????

Very impressive!


4.56 gears, trex, 42# injectors, tires, 3100lbs...
what rear end is in the car? intake? unmuffled?

yea it would still be cam only.....stock motor with cam only.... now if hes spraying then that number is able to be reached.... i got some friends with tin can mustangs stock 5.0 motors with girdles going around those numbers and faster with spray

Thank you for clarifying that.
LOL Laugh Out Loud. Yes I am laughing at you. The comment about spray to be exact. Like I said bring me a grand and a set of 241 heads. Untill then there is no need for your non-sense in this thread. Incase you didn't know the record it a 10.22 with a 3050 raceweight ;) And no there was no spray :)

A moser 12 bolt with a spool and light weight axles. As far as the intake goes its a Fast 90/90 setup ported by SSP. I am runnning a dynatech muffler that to my knowledge has no restrictions.

cant wait to see your car in the magazines.... thats very impressive then....

seems like more then just a cam... but still very impressive....