since we dont have a lift...
 

since we dont have a lift to put the motor in from the bottem we were thinking of a way to drop the K and put the motor in that would be the easiest. we decided to take advantage of the "crane" we have in the driveway lol my dad came up with this crazy mid-evil device and this is the results....

http://i115.photobucket.com/albums/n...1217091527.jpg
http://i115.photobucket.com/albums/n...217091527a.jpg


going uppp!
http://i115.photobucket.com/albums/n...1217091536.jpg
http://i115.photobucket.com/albums/n...217091538a.jpg
http://i115.photobucket.com/albums/n...1217091538.jpg

it accually worked lol the car is now on jackstands in the front.

What did you use to lift it, i mean whats the rig above the visible wires?

Lookin good are you gonna paint the engine bay while you have it appart??

its an I beam on a swing out with a 7k winch on it. ill get pictures next time when i go down there

yeah. you can see were we cleaned the rust and sprayed rust preventer stuff over it. its gunna be gloss black.

me n another member here did that to pull his motor. i brought my chains and we used a engine lift and lifted front end of car and took motor out from under car. we did it in a lil garage too.

nicee. you guys put the motor back in bolted to the K and roll it in? or you do it another way?

I believe thats the way were going to be doing it just waiting on motor right now it was easy to drop pain was the harness mainly. But as long as u got a few. Hands to help its easy we had about 4 people helpin to n we dropped motor n trans at same time.

i got the car as a roller so there was no need to take the old one out lol and we took the complete wiring harness out bc this car is a 95 and the old one was a 93. so we swapped out for the speed density/OBDI harness. because the roller didnt have one

Is the 95 obdI or obdII?

OBD2 and MAF

Is that a saleen mustang?

You know your gonna fail inspection if your switching to obd1 then right? Unless you got the hommie hook up lol

OBD1.5

nope lol its a bolt on GT. its my brother, ive been driving it since i lost my car. its got roush wing, roush side exhaust, cobra r bumper, xenon rear bumper.

still got the inspection sticker from the old car ;)

Gotcha8-) What are ya gonna do for next time tho:shock:

its got 2 years on it... so idk. by that time ill either have a different car, or this one will we a track car lol

Wait, why would he fail?

tints, ORY pipe. stuff like that lol

Cant hook an OBD1 vehicle to an OBD2 comp, lack of cat monitoring, and other diffrences between obd1 and obd2. They dont sniff obd2 vehicles they just plug them into the computer.

Edit: didnt know what year they cut off the comp check, so you might be alright

Anything older than 96 they dont check computer so if ur runnin clean ul be ok

when i had the first car inspected, it was "sniffed" as a pontiac vibe...

Your point being?

Car is a 95, so sniff test.

no cats = no clean :lol:

If they cant hook the comp up to their machine its an automitic fail, but I didnt know they just used the sniff test on the 95 I thought it was all OBD2 vehicles that got hooked to their comp