NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   Will these wires work with an OTVC loom kit? (http://www.njfboa.org/forums/showthread.php?t=48826)

vipergtx500 12-25-2009 08:47 AM

Will these wires work with an OTVC loom kit?
 
Hey guys, my sister got me a set of Taylor 8.2 Thunder Volt spark plug wires for christmas, and I'm wondering if they would fit an OTVC loom kit that i was planning on getting when I did my headers?

LTb1ow 12-25-2009 08:49 AM

Doubt it.

vipergtx500 12-25-2009 08:51 AM

too short or too long?

LTb1ow 12-25-2009 08:52 AM

Prob way to short if they are made for stock routing.

vipergtx500 12-25-2009 08:54 AM

ok thanx for the heads up

LTb1ow 12-25-2009 08:55 AM

Are they a pre made kit or custom?

vipergtx500 12-25-2009 11:21 AM

premade, seem like universal ones, she got them from summit

sweetbmxrider 12-25-2009 01:00 PM

you'd be better off returning them and buying the pre-made otvc kit. it will look great and fit perfect.

JL8Jeff 12-26-2009 10:43 AM

I ran the Taylor wires in the stock routing on my old supercharged 93 Indy Pace Car with no problems. I ran the MSD 8.5 wires in the stock routing on my old 96 SS with Pacesetter longtube headers with no problem. OTVC really isn't needed unless you just want to say OTVC. But if that's what you really want to do, then your best bet is to return them and exchange them. I doubt the length would be close enough to go OTVC.

vipergtx500 12-26-2009 11:12 AM

ok seems like I'm returning them, thanx guys

sweetbmxrider 12-26-2009 12:57 PM

hey, its the thought that counts right? :) i got a how to build a performance gen III book. nicely written, but no good for the LT1 :(


All times are GMT -5. The time now is 04:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.