WTB: 18" 45* angle cut 3" tips
 

anyone know where i can find a set? for around 50-100$

18" long
3" diameter
45* slash cut
single wall

I think I saw them at pepboys, but I cant remember what the inlet diameter was. and the ends were rolled

18" long, slash cut, single wall, non-rolled edge...

3"in/3.5" outlet http://www.summitracing.com/parts/JEX-JAC418-3/ $27 each steel
http://static.summitracing.com/globa...c316ss_w_m.jpg

3"in/4" outlet http://www.summitracing.com/parts/IMM-577494/ $36 each stainless steel
http://static.summitracing.com/globa...8214ns_w_m.jpg

thank you thank you, dont know why i could not find these

i might have something like that. they are magnaflow tips that the mustang guys use IIRC. i'll check tomorrow.

alright sounds good let me know

they are 2 1/2" inlet to 3 1/2" outlet and are 22" long. the inlet is stepped so you could expand them with a pipe expander to fit over a 3" pipe. they are unused and dirty but will clean up with compound. let me know if you are interested or want pics.

yeah send me some pics please, not sure if 22" will fit underneath but i am going to measure.

ok i'll bring them home from work tomorrow and snap some shots for you and post them in here.

sounds good