NJFBOA - Home of New Jersey's Camaros and Firebirds - Torque Converter Install Question

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Transmission and Driveline (http://www.njfboa.org/forums/forumdisplay.php?f=38)

- - Torque Converter Install Question (http://www.njfboa.org/forums/showthread.php?t=50640)

jts98z28

04-04-2010 06:48 PM

Torque Converter Install Question

hey i put a th400 with a 4000 stall in my car today and a hughes performance flexplate, is the converter supposed to be as far back to the transmission as possible? i have never put in a transmission before and im not sure if i should run a spacer or not, the guy i bought it off of says he didnt run one but im not sure
thanks

KirkEvil

04-04-2010 08:28 PM

I had about 1/8" clearance between the converter and bolted it up with out a spacer.

http://modernmusclecars.net/forums/a...p?do=tcinstall

sweetbmxrider

04-04-2010 08:46 PM

http://www.ls1tech.com/forums/automa...questions.html

MonmouthCtyAntz

04-26-2010 11:23 AM

Didnt use any spacer here.

sweetbmxrider

04-26-2010 02:00 PM

Quote:

Originally Posted by MonmouthCtyAntz (Post 700039)

Didnt use any spacer here.

do you have a th400?

MonmouthCtyAntz

04-26-2010 03:48 PM

Quote:

Originally Posted by sweetbmxrider (Post 700070)

do you have a th400?

Cousin does

This might lend a hand

http://www.docstoc.com/docs/22333274...TH-350-TH-400/

All times are GMT -5. The time now is 11:38 PM.