|
355 tpi..forged..built by JSperformance..$2000 - SOLD
Had this built late 2008 by Josh at JS for my Monte Carlo SS which I have since sold. I was going to put the engine into an IROCZ or something similar that needed less body work than the monte..but plans changed and I got a 4th gen SS. I'm sure Josh remembers the engine and can answer any more technical questions..as all I really know aside from what he gave me on paper..is that it made my Monte SS FAST.
Engine built by JS Performance- Here is the spec sheet he provided Engine has about 2500 miles on it. 355 sbc 3970010 casting 4.030 bore honed with torque plate line honed deck milled .020 durabond cam bearings new freeze plugs screw in oil galley plugs blueprinted and assembled gm crank cut .010 and polished trw forged flat top pistons trw moly ring set scat I beam connecting rods w/ arp bolts king rod and main bearings pioneer 153 tooth flex plate pioneer 6" balancer trw pins pressed on and rotating assembly balanced howards hydraulic roller cam speed pro hydraulic roller linked lifters sa double roller timing set melling HV oil pump and pickup comp prod cam button and retainer plate fel pro gaskets and seals Heads- 882 casting 1.94 intake valves 1.5 exhaust bronze guides pocket ported surface milled machined for pc seals assembed with new springs and retainers comp prod. valve spring and retainer set comp cams push rods elgin 1.5 ratio roller tip rocker arm set cometic MLS head gaskets VTO valve seals Also has a new 88 Vette distributor Asking $4000 obo for the engine.... comes with all the paperwork from JS Engine comes with TPI computer, and would be ready to drop in your car and go. |
pics i might be interested
|
******Price DROP***********
I'm looking to get a t56 swap setup for my Camaro and found one complete in Rochester. At this point I dont plan on using the engine for anything so for it to sit regardless of all the money I will lose I would rather see someone use it!! $2500 and that will cover my t56 parts..so I'd be happy as hell with that. I can also deliver it. 973 919 4110 |
my loss is your gain...if anyone is doubting whats in this engine you can call Josh over at JS I'm sure he would be able to verify as he built it.
|
cmon guys..great hardly used engine here for a fraction of what it would cost to have built...
|
Any dyno sheets or quarter mile runs to indicate power level?
|
Quote:
Unfortunately no. I never dynoed it or ran it at the track. To be honest I rarely got to drive the car when the engine was finally done. It was done in January 09 with snow on the ground and I lost my job a few weeks later. So it basically was driven around in the summer just a few miles a week if that. Then I bought the Camaro in December so it sat for a few months before I pulled the car apart. I will PM josh at JS and see if he has any idea, maybe he can chime in here. |
$2000????? any takers??
|
cmon....somebody. please
|
$800 long-block only?
|
hmm i was thinking about going 454 in my 78, however why stay old school when i can upgrade! how easily would a comped engine go into a classic all mechanical car? ive never done anything like that, all i've done is changed trannies a few times haha, also do u have any ballpark figures for hp/fpt?
|
PMs sent to 79 ad adamn1978
|
Steve, post up the cam card so all the experts can have an idea of what kind of power this engine makes.. Its a good runner as is but can still be upgraded to make more power if desired..
|
The Camshaft is
Howards 110245 Valve Lift- .504/.504 Duration 280/292 gross lift- .336/.336 Degree @ .050 222/230 and if someone wants to trade me parts + cash, I'll take some LS1 parts. SLP or Spohn. Not interested in any gen 1 sbc stuff.. Also not interested in people who like to waste time. |
still a great deal! cmon somebody!
|
would entertain a serious offer..this is really just being wasted at this point. someone take it off my hands!
|
BUMP Wasting space!! Drop it in your car and GO
|
BUMP Someone!!!!
|
alot of interest but nobody has put any money down..still available
|
Just curious as to why you stayed with the smaller valves when most people go with the bigger ones....
|
Quote:
|
Ok have had a couple guys offer to put down a deposit which is cool with me, but still no cash in hand so its still available!!
|
How much HP/torque do you think it made? PM me your # thanks
|
Pending sale
|
| All times are GMT -5. The time now is 03:07 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.