NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Transmission and Driveline (http://www.njfboa.org/forums/forumdisplay.php?f=38)
-   -   noise in rear (http://www.njfboa.org/forums/showthread.php?t=51646)

Chad 06-01-2010 10:58 PM

noise in rear
 
I have a 2000 Z28 with 3.73 gears. The gears were just put in but even before they were in i was hearing a loud humming noise coming from the rear when i would moderatly accelerate and when i would just let off the gas and let my car roll at the speed i was originally going. Some people told me its a pinion bearing but i just got all that replaced when i put the 3.73 gears in. Any clue to what it might be would be helpful. Thanks guys.

NJ Torque 06-01-2010 11:13 PM

Could be gear lash...

What weight fluid are you running?

Chad 06-02-2010 09:09 AM

im not sure actually...

WildBillyT 06-02-2010 03:36 PM

How high pitched is the noise?

Chad 06-02-2010 04:01 PM

well sometimes i can hear it over the radio, and if the radio isnt on at all its pretty loud.

B4C 06-02-2010 04:18 PM

gear wine? Just turn the radio up :lol:

Chad 06-02-2010 04:51 PM

yea thats what i usually do i just wanna make sure its nothing major...

IROCZman15 06-03-2010 05:40 PM

i could be wrong, but i've heard Richmond gears are "noisy" i have 3.73 richmonds in mine and they were noisy after the install, but i've just got used to it.. and this was 6 years ago. if they ween't rchmond then maybe u have an issue where they need to be shimmed/adjusted . check the wear pattern with that special paint if the whine is that bad. or it could be a bad posi unit?

Chad 06-03-2010 05:52 PM

they are richmond gears but i also had this noise before i put the gears in so its not that.

Slow-V6 06-05-2010 09:39 AM

Its a 10 bolt!! nuff said!


All times are GMT -5. The time now is 02:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.