![]() |
Wiper problem...
So I currently got the 87 ta up and running and back on the road, just ran into a slight problem..
When I go to turn on the wipers, the blades only raise about an inch and a half to two inches. I was able to get them to go all the way up after about 25 times of turning it on/off, but now back to the same problem. And this happens with any setting (hi/low/etc..). I figured I would post up to see if anyone has had/heard of the problem before I go and start messing with some things. Thanks in advanced. |
All times are GMT -5. The time now is 02:24 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.