NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)
-   -   Doug Nash 5 speed and Long Shifter and clutch parts (http://www.njfboa.org/forums/showthread.php?t=53472)

vegaken 10-13-2010 03:16 PM

Doug Nash 5 speed and Long Shifter and clutch parts
 
Doug Nash 5 speed with a 3.09, first gear and 1 to 1, fifth gear. It is a fresh pro-shifted unit. It will fit behind Chevy motors even though it has an 18 spline input shaft. Price for trans is $1000.00

Long Shifter for this trans. It is a pistol grip inline shifter with rod ends for the linkage. Price for shifter is $500

Mark Williams yoke for drive shaft for this trans with a 30 spline output. Cost is $100.

Two Ram aluminum flywheels and pressure plates and clutches for sale also. One set needs to be freshened and the other can be put back in car as it only has about 10 runs on it. To send it back to Ram will cost maybe $200 to get everything back to new. The pressure plate is adjustable from 1900lbs to 2400lbs and the clutch is a metallic six puck disk. I will verify the pressure plates if someone is interested. Each complete setup new cost about $1000 new. Will sell both sets for $700. The flywheel alone is about $400.

Will sell separate but will also make a deal if someone buys it all.
Ken


All times are GMT -5. The time now is 06:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.