Solid Roller Lifters, LS1/6 NEW stock coil, MSD wires, MSD coils
 

Crane Cam Mechanical Roller Lifters
SBC set of 16
Horizontal link bar
Used for less than 8k miles.
-sells new for about $380 from SummitRacing
-Asking $125 obo plus shipping
http://i32.photobucket.com/albums/d5...s/IMG_1454.jpg


MSD LS1/LS6 Coil Packs
Used for about 5k miles, until I noticed a misfire. One coil had issues(I thought) so I swapped in a brand new stock replacement to check it, and all was good again. Then a few weeks later I had another misfire issue so I pulled all the coil and installed stockers I had bought. Ever since, well as little as I drive the car, it has been fine so now these MSD coils are of no use to me.
They are a little dirty, but not bad, and could clean up better.
-New they sell for around $625..
-Asking $150 obo plus shipping
http://i32.photobucket.com/albums/d5...s/IMG_1459.jpg

MSD LS1/LS6 Spark Plug Wires
Used for about 5k miles. When I dealt with the above mentioned misfire issue, I had changed out coils, plug,s and wires just to be sure I covered everything. Plus I swapped these out to new black MSD wires for a more OEM look.
They look great and cleaned up well.
-New they sell for about $65..
-Asking $40 plus shipping
http://i32.photobucket.com/albums/d5...s/IMG_1455.jpg


LIKE NEW OEM Replacement DENSO LS1/LS6 Coil
Used for ONLY about 20 miles...
-Bought at Autozone for $46..
-Asking $40 obo shipped
http://i32.photobucket.com/albums/d5...s/IMG_1460.jpg
http://i32.photobucket.com/albums/d5...s/IMG_1462.jpg