WTB 82-92 NON DEFROST glass** PLUS MORE delete stuff, flat hood too...
 

I want either a whole hatch or just the glass in good-to-mint shape.

Must NOT have rear defroster.

If its a full hatch, a flat deck(no spoiler holes, wiper, brake light etc) is what i want.
i can provide a hatch with defroster as partial trade if needed, or ill buy your glass outright.





WTB:
82-85, 87-89 Non-defrost hatch glass
decklid for 3rd gen with no spoiler holes, brake light, etc
82-92 flat style standard CAMARO hood in mint shape
3rd gen a/c-heater box firewall delete plate
3rd gen 1LE radio delete plate
82-92 door lock button delete plates (2)
82-89 defroster button delete plate

and any other delete plates/covers of any kind....

Not trying to steal the thread but I also need one if anyone has two hatches

i have 2 with m defrost, one form an 87 trans am , but there is no spoiler and the other one is from an 88 camaro it has the small looking highrize on it,

well as long as they dont have defrost, either one is the same to me, since id have to fill holes on either decklid.

whats the condition on the metal trim around the edge of the glass and how much are you asking?

whats your e-mail address for the pics

I believe I saw one on the jersey shore section of Craigslist.

TTT

also looking for a flat base style hood...

I've so far got a price of 240 for brand new rear glass and 200 for a brand new hood....

e-mail sent

got it. I really dont want to deal with stripping all the tint and glue off, but regardless, how much you asking for either glass?

asking $150

hmm, thats too high for me to justify for a used glass, considering the hatch section id just be throwing out.

I appreciate your response to this thread and sending pics and all, so i didnt want to leave you hanging without a response.

I will be checking a local u-pull-it and a few other places over the next few months, and if it comes down to the car almost being done and i still need the glass maybe id be willing to negotiate more near your asking price. -paul

ok no problem,

TTT for new title.

i saw the hood my friends has yesterday. its flat. needs paint. got a minor ding on it

price? a minor ding i can work with

just texted him for ya

$50 picked up

sweet! ill be in NJ tues-sat(or till next mon) and i could find a way to grab it then. i shall be in touch, most likely through facebook.

Kk. ill get the hood to my shop so itd b easier for ya

did they even make 82-89 climate control delete plate?

That strikes me as something that may be easy to make. Or turn into a switch panel.

oh yes. a small sheet of black plastic with some kind of texture would take care of most of his crazy needs :)

im not aware they made a climate control delete plate, never heard of it. AFAIK, every 3rd gen had at least heat, so there are heater controls, and delete plates for the dash vents, but not the control, nor the hole in the firewall.

seen speaker delete plates for the dash too

the door lock and radio delete are currently on ebay

radio
http://cgi.ebay.com/ebaymotors/82-92...Q5fAccessories

door lock i believe
http://cgi.ebay.com/ebaymotors/82-92...Q5fAccessories

even found a v6 smog delete pulley that i didnt know existed either, unless somebody made it.
http://cgi.ebay.com/ebaymotors/82-89...Q5fAccessories

here's a firebird dash vent delete plate
http://cgi.ebay.com/ebaymotors/82-92...Q5fAccessories