harmonic balancer
 

So Im about 2 weeks away from having my 396 lt1 put into my 97 Z28. I just lowered the old motor and trans and was going over a few things that I need to take off the old motor, clean, paint and put onto the my new one. So onto my question I need a new harmonic balancer, my motor is from Golen motor works and I know the lt1's are internally balanced in the front and externally balanced in the rear (ie flywheel) anyone know of good harmonic balancer from summit, jegs, ws6store, hawksthirdgen? Also Im 25,000 grand into my project and funds are past depleted. 550 hp with open headers will sure be fun though:lol:

thanks LTb1ow

here is a few photos

new motor photos, lots more photos to come in the next 2 weeks between the new 12 moser rear, full BMR rear suspension and soon front suspension, new brake set up, and in two months the car is going to Hillsborough and getting a complete exterior overhaul.

Looks nice, does Golen do any engine dyno pulls?

he does, I have a print out of the dyno pull when I got the motor

I have a brand new replacement from rock auto i'll give you.

can you send me a photo of it? and how much do you want for it?

your ground effects bring back so many memories.
Any pics of the car?
engine looks amazing btw


http://i188.photobucket.com/albums/z...IMG_0673-1.jpg

that motor looks great !

and is the car viper steel grey ?

thanks guys for the complements, this car has been a project for the past 4 and half years, these photos were taken after I put my BMR lowering spring and koni shocks on.

lookin good !

dude that things banginnnnnnnn

Hey anyone know of a good set of motor mounts from summit, I just want rubber ones, not anything polyurethane. I hear the polyurethane ones give off a lot of vibration.

newest photo of my 396 with polished and ported intake manifold, bolted on.

It was like $60, you can have it if you come pick it up. Not interested in shipping it just cause I'm way too lazy. If you PM me your number I can send you pictures.

You will ruin rubber motor mounts quicker than your rear tires. Get poly and enjoy feeling one with your motor :) I wouldn't put a stock crank pulley on this motor either. ATI is a great piece 8-)

are you headers going to clear the pan kick out?

canton makes nice pans

I went out and got my Ati dampers cool $400.00 bills dropped, I went out also got OEM motor mounts and polyurethane ones as well. I found out that my outer tie rod is shot so going out and replacing all inner and outer tired rods.

I hope my hooker super comp headers clear the kick out on the oil pan. My headers have been out at mirror finish polishing for the past 7 months and I completely feed up with this polishing company....I mean come on 7 months and I still don't have my headers....wtf