87 IROC 62.5k miles
 

87 IROC 62.5k miles, LB9 (converted to carb), T5, G92 hardtop.

Tons of pictures at the links below:

http://www.njfboa.org/forums/showthread.php?t=58938

http://www.njfboa.org/forums/showthread.php?t=58949

www.fquick.com/88ws-6



I'm selling because I'm getting married next year and a home purchase looms in my near future. The original TPI parts will be sold with the car along with a driver-side GTA power seat (which matches the current passenger seat). I also have a brand new set of GM OE front parking lights in the box that will come with the car as well as one new high beam headlight, 4 NIB LS1 brake pads and NIB Pro 5.0 shifter.

In case you haven't read about the car, I picked it up Feb 2012. Last owner swapped a Holley 600 carb and RPM performer intake on and botched up the fuel lines. Carb needs to be rebuilt as it seems to only be running off the accelerator pump. New fuel lines under the hood were installed along with an adjustable fuel pressure regulator and gauge. The carb sees a steady 4.5 psi. Any questions, PM as you like. The car is currently titled, registered, insured but not inspected.

I'm asking $3000 because that's what I paid.

~Matt


http://www.fquick.com/images/vehicle...jpg?1329243346

http://www.fquick.com/images/vehicle...jpg?1329243350

http://www.fquick.com/images/vehicle...jpg?1329392436

http://www.fquick.com/images/vehicle...jpg?1329392641

http://www.fquick.com/images/vehicle...jpg?1332765784

Mods include:

Engine:
Accel Dist
Crane Ignition Box
Holley 600cfm carb
RPM Performer intake manifold

New Alternator
Water pump
Power steering pump
Radiator + hoses
180* Thermostat
Dual electric fans
Mech. Fuel Pump

Suspension:
Koni Yellow FRNT/REAR shocks/struts
UMI Adj camber plates
Adj Panhard Bar
New ball joints
IN/OUT tie rod ends
Center link and Idler arm
Rebuilt Steering Box (QUICK RATIO)

Brakes:
LS1 Front/Rear discs
Slotted Frnt Rotors hawks pads
SS Lines
New master
ADJ Prop Valve

Rear End:
9 Bolt
3.70 POSI
7K miles on complete rebuild

Interior:
Corbeau racing seat(driver) fixed back
Passenger seat is from a 91 GTA (power)
Autopower Harness Bar
GForce 5 pt harness
Autogauge tach
New carpet
New low beam headlights
CD Player

The previous owner did all these mods and gave me a stack of reciepts. Car also has the SPID sheet:

http://www.fquick.com/images/vehicle...jpg?1329393082

Don't suppose I could take it for a spin for a preview of whats to come for me with my 84? LOL. Seriously though, I know a guy who might be interested if he can put the money together.

bump

I didnt notice any mention of the condition of the body? I may have missed it but how is it in terms of rust?

Two tiny specs of rust that the PO painted over on the passenger side rear quarter on the edge of the wheel well and the battery tray has some rust but that's it. Body is solid. PO also put in some subframe connectors but it looks like only under the rails. No cross connections.


I'll be under the car this weekend hopefully so I'll take a few pics.

Pics:

http://www.fquick.com/images/vehicle...jpg?1341917612


http://www.fquick.com/images/vehicle...jpg?1341917635


http://www.fquick.com/images/vehicle...jpg?1341917600
^Yes that's the air dam and front bumper on the ground


http://www.fquick.com/images/vehicle...jpg?1341917624
^Only rust that I saw was on the "subframe connectors" that the PO put in. Just surface rust from not being prepped and painted right. Nothing a wire wheel wouldn't fix.

this car is quite solid, no body rust anywhere we could find while under it this weekend. However, the PO of this car needs to be savagely beaten for some of the "mods" he performed. We are pecking away at the list though!

bump

Original post update:

Included with the car (new in the box):
4 LS1 brake pads
Pro 5.0 short-throw shifter

bump

Sold pending payment.