S/C project build parts- gauges, rad, I/C, fan, oil, etc
 

(All prices include shipping/delivery)

Radiator - $150
Griffin aluminum race radiator 24"w x 19"h x 3"wide
1.5" inlet of top pass side, 1.75 outlet on bottom driver side
1/4" npt drain hole, 1/4" npt fitting hole on top driver side.
No fill neck.
used for maybe 100 miles

Intercooler - $240
Treadstone TR-10
Core Size, 10.5" X 24" X 3.5" (Overall length 34")
3" inlet/outlet
1000 CFM flow rate
666 HP efficient
Less than 2psi pressure drop at max flow
mounted but never had boost through it
http://www.treadstoneperformance.com...rcooler++666HP

Turbowerx Oil Scavenger Pump - SOLD
http://www.treadstoneperformance.com...+Scavenge+Pump
all specs listed there. was $399 New
Comes wired with 30a relay(not included when you buy it new)
Used for a max of maybe 10 minutes

Vintage Air A/C condenser - $100
22"w x 14"h
fitting caps have not even been removed
just mounted in place
http://www.summitracing.com/parts/VTA-03262-VUC

Perma-cool 8" electric fan - $75
Works great as my aux fan, used maybe 100 miles
http://www.summitracing.com/parts/PRM-19128

Stewart Warner boost gauge - $45
new, never saw boost, open package
http://www.summitracing.com/parts/SWW-214373

Stewart Warner Oil pressure gauge - $65
sender was mounted but never wired, it is included
assorted fittings, T and straight included
gauge was never wired up, open package
http://www.summitracing.com/parts/SWW-214254

Stewart Warner fuel pressure gauge - $85
sender was mounted but never wired up.
includes fittings to connect to fuel schrader valve and make 180degree turn
gauge was never wired up, open package
http://www.summitracing.com/parts/SWW-214218
(fitting - http://www.summitracing.com/parts/CEI-107133)
(All 3 Stewart Warner gauges for $180)

Spectre rubber 90 degree tubing coupler, 3.5"
I have 2, one new one used
I believe these will stretch enough to fit over MAF ends.
http://www.summitracing.com/parts/SPE-9585
Brand new in box - $35
used - $30

Intercooler Piping...

Assorted black 3" IC piping, - SOLD
Assorted "Chrome" IC piping, - $10 ea
3" IC piping silicone couplers, black(some blue) - $5 ea
(2)45degree 3" black silicone couplers, - $15 ea
3"-4" reducer(TB size), 90degree, silicone, black, - $15
3" 90" coupler, silicone, black, - $15 SOLD
3" T-bolt clamps(for 3" silicone couplers), - $2 ea SOLD
Large cone air filter, 3.5"neck, used, $5


Oil system

-4an 3foot oil supply line with -4an fittings on each end, - $35
-4an to 1/8npt fitting adapter, straight, - $5
-4an to 1/8npt fitting adapter, 90degree, - $5
oil bypass cover for LSx engine, tapped for 1/8npt oil feed, - $25 SOLD
-8an oil drain hose(2 sections - 1' and 5'), and assorted -8an fittings - Inquire with needs
Jegs low oil press warning light kit, sensor, light, wiring, and 3/8npt adapter port, - $30
-8an 120degree Russel hose end, http://www.summitracing.com/parts/RUS-613410, new in package, $20



I may have left out other small items and other silicone couplers.
I do have some Powerdyne kit parts for an LS1 car, like some pipes, air lid adapter, main bracket etc etc. Powerdyne headunit will be stripped down and sold for parts on ebay.

Paul, how much for the "3"-4" reducer(TB size), 90degree, silicone, black, - $15" shipped to 07757?

And have any pics of it?