NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   Rim/Tire fitment (http://www.njfboa.org/forums/showthread.php?t=63457)

fbirdfreak 06-19-2013 07:26 PM

Rim/Tire fitment
 
Hey guys, does anyone have an 18in rim I can use to double check for good fitment on my Trans am? I have it lowered 1.3in all around and just want to make sure before I buy 18's that I won't have any problems, unless someone can reassure me that I'm being stupid and 18's will fit just fine lol :kneeslap:

If so I can come by wherever you are whenever you want, I'm in North Brunswick.

Blackbirdws6 06-19-2013 07:58 PM

18s fit fine but the width and offset need to be taken into consideration.

rockbox 06-20-2013 09:43 AM

I have 18s on my 2001 TA, also lowered.
18x8.5 up front 18x10 out back. They rub a VERY tiny bit when I have the wheel maxed to the left or right. No big deal.

fbirdfreak 06-20-2013 03:13 PM

I'd been planning a 18x8.5 front and a 18x10 in the rear with a +50mm offset on the rear, and 255 45's in the front and 285 40's in the rear.


All times are GMT -5. The time now is 11:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.