Feeler: WTT Manual to Auto
 

I am tossing the idea around of turning my car from manual to auto. So I am putting some feelers out. I am looking to trade my current set up for auto if I do it. I have Hayes flywheel,ram powergrip HD clutch,Lakewood Blowproof bellhousing,Tremec TKO600 (few miles and few passes on it),Spohn crossmemeber with driveshaft loop,Rebalanced and spicer parts on driveshaft. Let me know.

Er, what car is this in?

if a third gen, i got an auto 88 GTA. 62K original miles, and all stock.

Its in a 86 Camaro. I am looking for a Built auto trans

I don't know what it entails to swap from manual to auto in a 3rd gen but my good friend is selling his TH400 for cheap.

ok no prob

If you are considering a th400 I had mine built to handle 700hp+ and I was considering going back to a manual in my Vette. It has 3 passes on it before I parked the car a couple years ago and started the swap from alcohol back to gas. Don't think I have my transblanket anymore but it would have expired anyhow Still in car so everything else is there let me know if you have any interest.

I am looking for a complete swap, the switch over shouldn't be hard. Nhra bill- do you just have a trans or everything to swap into a third gen

No, my car is a 75 Corvette with a 6-71 blower on a sbc 350. I have trans convertor flexplate and B&M prostick shifter w/ cable all you would need:

th400 kick down cable and a crossmember to fit several companies make crossmembers that have a mount for your stock torque arm.

Pickup a driveshaft proper length.

I swapped a th350 into my 87 bird 20 years ago when I was a kid and I knew nothing with all the support from internet now and tons of aftermarket companies it should be easy.

Well if your interested pm me some info on what you have and maybe we can work something out