NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)
-   -   LS1/Fbody Parts - H/C/I, suspension, rear etc... (http://www.njfboa.org/forums/showthread.php?t=64099)

BlackBADaSS02 10-15-2013 06:15 PM

LS1/Fbody Parts - H/C/I, suspension, rear etc...
 
I was gathering parts to build my car, but I lost interest and am planing on moving, so selling everything.

Cloyes Hex-A-Just Timing Set For LS1 #9-3153A (Gears & Chain) New in Box - $75

PST Aluminum Drive Shaft 3 1/2", 1350 U Joint, Strange Racing Yoke - Stock Length (10/12 Bolt) - used for 5 mile test drive - $375




Texas Speed Torquer V3 Camshaft 231/234 .643/.598 111 lsa New in Box - $325 SOLD

Texas Speed PRC LS6 Stage 2.5 Cylinder Heads. These are milled to 59cc chambers. PRC Dual Valve Springs .650 lift. 2.02"/1.575" Stainless Valves New in Box - $1400 SOLD

UMI Lower Control Arms - Chromemoly - Double Adjustable Rod Ends - Black Used - $100 SOLD

Morel Link Bar Lifters #5206 New in Box - $450 SOLD

Texas Speed Chromemoly Pushrods - 5/16" - 7.400" New in Box. - $50 SOLD

TSP Ported LS6 Oil Pump SOLD

Heads and Cam Gasket & Bolt Kit - GM MLS head gaskets, GM Center Bolt valve cover gaskets, GM Valley cover gasket, GM Timing Cover gasket, Oil Pump O-Ring, GM exhaust manifold gaskets, GM Front Crankshaft Seal, FAST Intake manifold gasket set. ARP Hex Head Bolt Kit #3609, & ARP Harmonic Balancer Bolt New - $350 SOLD

FIC LS Series 42lb Injectors New In Box - $350 SOLD

FAST 102mm Intake Manifold Cathedral Port New in Box - $800 SOLD

FAST 102 mm Throttle Body New in Box - $400 SOLD

FAST Billet Fuel Rails New in Box - $150 SOLD

FAST F-Body Fuel Line Adapter Kit New in Box - $100 SOLD

Comp Cams LS Trunion Upgrade New in Box - $120 SOLD

Powerbond 25% Underdrive Pulley w/ Accessory Belt and A/C Belt New - $170 SOLD

Moser 12-Bolt Rear - 4-Series 33 Spline True Trac, 4.11 Gears, Aluminum Cover - POR-15 with Top Coat. Has UMI Adjustable T/A Bracket attached with the bolts tack welded. Also has the UMI sway Bar adapter. Needs Bearings as the rear makes noise over 20mph. - Used - $1300 SOLD

Katech C5R timing Chain - New - $80 SOLD

Katech LS1 Rod Bolts New - $120 SOLD

UMI Torque Arm Relocation Kit - Manual Trans Black Used - $150 SOLD

UMI Full Length Adjustable Torque Arm Chromemoly - Red Used - $200 SOLD

UMI Panhard Bar - Chromemoly - Double Adjustable Rod Ends - Black Used - $100 SOLD

SLP Strut Tower Brace Black Used - $50 SOLD

Delphi 85mm MAF w/ Caspers Adapter #108100 Used - $50 SOLD

MyFirstZ 10-15-2013 07:11 PM

man I want that Moser ..... if it doesn't sell fast let me know

ThoR294 10-15-2013 07:43 PM

question about the D/S. Will that fit my car with a T56 and a stock rear?

BlackBADaSS02 10-15-2013 07:57 PM

Quote:

Originally Posted by ThoR294 (Post 892432)
question about the D/S. Will that fit my car with a T56 and a stock rear?

It would work length wise, but the stock year wont work with the 1350 u joint

ThoR294 10-15-2013 08:23 PM

ah. could I just put a regular U joint on the back?

WSex 10-15-2013 09:33 PM

Torque arm relocation. Send pic to 9734459231

BlackBADaSS02 10-16-2013 06:41 AM

Quote:

Originally Posted by ThoR294 (Post 892437)
ah. could I just put a regular U joint on the back?

I guess you could, but that wouldn't be worth it IMO.

Z28M6TT 10-16-2013 11:23 AM

For the 12 bolt, when you say 4 series are you saying 4 channel abs?

Also, does it need a complete rebuild or just wheel bearings?

Thanks

BlackBADaSS02 10-16-2013 12:12 PM

Quote:

Originally Posted by Z28M6TT (Post 892483)
For the 12 bolt, when you say 4 series are you saying 4 channel abs?

Also, does it need a complete rebuild or just wheel bearings?

Thanks

It's the 4 Channel ABS w/ Traction Control

I'm not really sure what bearings need to be replaced. The rear makes noise when going over 20mph.

WSex 10-16-2013 10:15 PM

Can I get any pics? Or link to new item...

BlackBADaSS02 10-17-2013 06:59 AM

Quote:

Originally Posted by WSex (Post 892502)
Can I get any pics? Or link to new item...

http://umiperformance.com/catalog/in...roducts_id=201

2kblackgtp 10-17-2013 10:20 AM

Package deal price on the 12 bolt, DS, and torque arm relo crossmember? Is the DS new?

foxriderry 10-21-2013 08:49 PM

Any further info on the rear? What kinda noises? How many miles?

BlackBADaSS02 10-23-2013 12:04 PM

I dont know the mileage on the rear, I bought it used.
If I get time this weekend, I'm going to crack the rear open and look at the carrier bearings. From what I read online, it looks like that is what makes the noise.

foxriderry 10-23-2013 12:42 PM

Ok if u can diagnose it and that's the issue I'll probably come and get it where are u located?

BlackBADaSS02 10-23-2013 01:10 PM

Millville

foxriderry 10-23-2013 05:53 PM

Ok lemme know, I'm def interested

Grifter 10-27-2013 12:04 PM

PM sent.

BlackBADaSS02 10-28-2013 07:26 PM

Some pics of a couple things. Sorry, crappy cell phone pics.
Moser Rear
http://i30.photobucket.com/albums/c3...s/IMAG0262.jpg

PST Driveshaft
http://i30.photobucket.com/albums/c3...s/IMAG0261.jpg
http://i30.photobucket.com/albums/c3...f51e3f6126.jpg

UMI Torque Arm, Lower Control Arms, and Panhard Bar.
http://i30.photobucket.com/albums/c3...s/IMAG0258.jpg

UMI M6 Torque Arm Relocation Mount
http://i30.photobucket.com/albums/c3...s/IMAG0259.jpg

MonmouthCtyAntz 10-29-2013 10:54 AM

PM sent on rear

KirkEvil 11-01-2013 09:41 PM

Whats the part number on the morel lifters?

Rob WS6 11-01-2013 11:28 PM

PM sent on relo bracket.

MonmouthCtyAntz 11-09-2013 08:42 PM

Good doing business w/ you....

BlackBADaSS02 12-02-2013 08:49 PM

bump

BlackBADaSS02 12-12-2013 07:38 PM

List updated


All times are GMT -5. The time now is 05:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.