Lt1 engine parts
 

Going in a different direction, time to sell off some stuff I've been hoarding

all parts are from an Lt1 f-body unless otherwise specified

-Ported trick flow 195cc heads, up to .600 lift cam 1.6 comp roller rockers included but willing to separate depending on interest~SOLD

-1992 corvette 4 bolt main short block with washed cylinder walls-needs to be over bored, had 72k on it plus i put less than 10k miles on it.~SOLD

-1995 bare block, no main caps or anything/ full nuude// stock bore, had blown head gasket~100

-canton tall notched sheet metal valve covers(real thing no knockoff)~SOLD

-intake from 1995 with egr block off plates, 36lb accel injectors, intake ported for 58mm with professional products TB-will separate ~ INJECTORS SOLD, PRICE OF REST OF INTAKE REDUCED~175

-home made mig welded front mount twin turbo manifolds, doesn't clear a/c t3/4 flanges, dual waste gate flanges. ~375

-Comp Cams 268XFI HR13 /218/224 .570/.565 113LSA with extreme energy lifters and push rods~200

-1995 gm vented opti with timing set if you wanted to covert, worked great no hiccups 20k miles~100

-1992 corvette water pump. didn't leak, 72k miles~20

- Holly twin 58mm Thottle body, end plate that the throttle cable wraps around keeps working itself loose, I had jb welded it for awhile and it was fine, needs to be fixed~50

-duralast oe replacement clutch 15k miles~40

-1995 water pump painted red with 160 thermostat, i also have a new 185 thermostat that goes with it if i can find it~40

- still installed in the car is a b body lt1 with unknown miles, it makes loud metal noises that arn't coming from in the valve train. may be rods, may be lifters, may be imaginary- its your call. does have a new generic opti that works great, does have a new set of jegs 8.5mm plug wires. does have all the sensors and water pump/coil and also has a jegs underdrive harmonic balancer. i need to save all the accessories but the engine will come with the f-body accessory bracket. also will not include exhaust. not willing to part it out yet so i can keep the car moveable in the driveway~250

i'd post pictures if i didnt have to sign up for image hosting, pm me with an email or phone number that i can send pics too. Located in Bridgewater nj will possibly deliver or meet somewhere if your buying enough :nick:

Heads sold! Corvette block sold!

damn heads sold!!! you're right down the road.

PM sent

Injectors and Valve covers sold!

Do you happen to have a coil/icm?