NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Multimedia (http://www.njfboa.org/forums/forumdisplay.php?f=45)
-   -   11.7 on 18" street tires (http://www.njfboa.org/forums/showthread.php?t=66570)

xrelapse13 11-23-2015 07:48 AM

11.7 on 18" street tires
 
Went to the track over the weekend and since I let my buddy borrow my drag radials, I decided to see what I can get out of the car on street tires.

Results were 11.7@127 and a 11.9@127 part throttle for the most part through 1st and 2nd.

2000 WS6
295/35R18 Nitto Invos
T56
3.90s
3800-3900lb raceweight


Blackbirdws6 11-23-2015 07:53 AM

Nice job on 18's. Any plans to put a different wheel/tire combo on it just to see what it would do?

sweetbmxrider 11-23-2015 08:04 AM



1-2 looked fun :)

xrelapse13 11-23-2015 08:38 AM

Quote:

Originally Posted by Blackbirdws6 (Post 922647)
Nice job on 18's. Any plans to put a different wheel/tire combo on it just to see what it would do?

i may borrow a friend's 28" MT on a 16" wheel to throw on the back and see if i can do 10.5-10.8 or so. Car still has more in it, running way rich at WOT atm.

Quote:

Originally Posted by sweetbmxrider (Post 922649)


1-2 looked fun :)

lmao yeah, i tried to go past 50% throttle :rofl:

BTW does the video show up in my original post? It's not working for me.

Blackbirdws6 11-23-2015 08:47 AM

Quote:

Originally Posted by xrelapse13 (Post 922654)
i may borrow a friend's 28" MT on a 16" wheel to throw on the back and see if i can do 10.5-10.8 or so. Car still has more in it, running way rich at WOT atm.



lmao yeah, i tried to go past 50% throttle :rofl:

BTW does the video show up in my original post? It's not working for me.

Not showing up for me but I saw it on Facebook. Do you have it running rich for a reason?

xrelapse13 11-23-2015 08:57 AM

Quote:

Originally Posted by Blackbirdws6 (Post 922655)
Not showing up for me but I saw it on Facebook. Do you have it running rich for a reason?

hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

Blackbirdws6 11-23-2015 09:04 AM

Quote:

Originally Posted by xrelapse13 (Post 922656)
hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

Ahh gotcha. Too busy working on other peoples cars right?

xrelapse13 11-23-2015 09:14 AM

Quote:

Originally Posted by Blackbirdws6 (Post 922657)
Ahh gotcha. Too busy working on other peoples cars right?

Exactly that, im unfortunately limited on time frame i can use my own dyno, so once i have my own place where im on my own time table i can finally dial my own car in. Customer cars take priority though.

sweetbmxrider 11-23-2015 10:24 AM

Quote:

Originally Posted by xrelapse13 (Post 922656)
hmmm, BMXRider what am i doing wrong? Showed up in your quote but not in my original post?

And nope, just never really had time to dial it in. And when i did some minor adjustments the sensor was old and was reading leaner than actual so the adjustments i made to get it into a decent range were still rich lol. I'll prob actually dial it in before i run it again at the track.

You use everything after the = in the link, including the underscore.

xrelapse13 11-23-2015 10:40 AM

Quote:

Originally Posted by sweetbmxrider (Post 922665)
You use everything after the = in the link, including the underscore.

great success :nod:

thanks sir


All times are GMT -5. The time now is 01:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.