NJFBOA - Home of New Jersey's Camaros and Firebirds - lets figure this out... vacuum and brake question

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Brake, Chassis and Suspension Tech (http://www.njfboa.org/forums/forumdisplay.php?f=28)

- - lets figure this out... vacuum and brake question (http://www.njfboa.org/forums/showthread.php?t=68330)

6spdg37s

03-01-2018 08:43 PM

lets figure this out... vacuum and brake question

I have a G-body with an LSX swap 5.3 LM7 cam is 232/234 .595/.598 and 110LSA with 243 ported/polished heads, but its carbed , car has terrible vacuum... brakes sucked had to get a vacuum canister and pump.

my 01 SS is LS1 car, is fuel injected but has a 242/248 .608/.612 w/ 110LSA has great vacuum and brakes...

only asking cause i might be taking this monte apart and was trying to figure this out.

MDSheds_SS

03-02-2018 06:01 AM

I would try to put the 243 heads on the camaro and take it track.... figure out the brake situation another day.

6spdg37s

03-02-2018 08:28 AM

Quote:

Originally Posted by MDSheds_SS (Post 946424)

I would try to put the 243 heads on the camaro and take it track.... figure out the brake situation another day.

whole carb and th350 setup might go into an f-body .... :nod::twisted:

MDSheds_SS

03-02-2018 09:00 AM

You won’t....

KirkEvil

03-03-2018 09:42 AM

Are the brakes only bad at idle/ cruise down? Is idle consistent and where is you your idle rpm and base timing sitting?

All times are GMT -5. The time now is 06:25 PM.