NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - BMR K-member/A-arms (http://www.njfboa.org/forums/showthread.php?t=8949)

Little G

01-25-2005 10:52 PM

BMR K-member/A-arms

Anyone with these installed? 12secondv6? Jersey_TA? The shop that's installing them says there is no bushing on the lower control arm and I'm not really sure what should be there. Also, the ball-joint on the Upper control arm is riveted in to the stock one and should that be welded to the BMR one? I need to get this done ASAP. I'm paying $24/day for a pos rental till this thing is done. Any help is appreciated. Thanks.

foff667

01-26-2005 11:41 AM

i would pm them or ask on ls1tech.com there are tons of guys there that would have experience with this.

Tru2Chevy

01-27-2005 08:57 AM

Problem has been solved....

- Justin

All times are GMT -5. The time now is 08:53 PM.