NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - Drum to Disc convesion (http://www.njfboa.org/forums/showthread.php?t=9103)

Savage_Messiah

02-07-2005 04:53 PM

Drum to Disc convesion

What's involved besides the disc assemblies and how much would it cost?

Savage_Messiah

02-08-2005 11:39 AM

How necessary is it to change the proportionary valve and the master cylinder?

Injuneer

02-09-2005 11:38 AM

The easiest way to do the swap would be to find a complete rear axle assembly out of a V8 4th Gen... that gets you the disc brakes and the limited slip diff if you don't already have it.

I'm not familiar with the V6 brakes... does the car have ABS?

Savage_Messiah

02-09-2005 12:19 PM

Got most of the answers I need, I am gettign a complete rear axle. Yes I have ABS, so does this one. I found out that the disc rears and drum rear cars used the same proportionary valve and master cylinder so I'm all set on that. Thanks anyway tho

JerzLT1

02-09-2005 12:23 PM

i guess that isnt the same for 3rd gens? i was told i need the Master and Proporting Valve for my Drum to Disc swap in my 86

All times are GMT -5. The time now is 03:15 AM.