NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)
-   -   Camaro up for sale again. LOW PRICE! *SOLD* (http://www.njfboa.org/forums/showthread.php?t=9889)

Ian 03-29-2005 05:24 PM

Camaro up for sale again. LOW PRICE! *SOLD*
 
this weekend I will be putting the motor back into the camaro so I can sell it as a whole car. I need to sell it to pay my mom back for loaning me money to buy my jeep. I owe her $2300, so thats as low as I can let it go for. I have a bunch of extra stuff to go with it, like extra door glass, extra front and rear windshields, extra rear axles if you want. Right now it has 3:90 limited slip, but I also have 2:73 limited slip(original rear) and a 2:45 limited slip, although I doubt you'd be able to spin the tires with that one. the car isn't perfect, but it isnt a basket case either. the paint is in decent condition. the interior isn't too bad either. Pics can be seen here http://community.webshots.com/user/ian_f under camaro and stuff thats for sale. If anyone wants pics of anything specific, let me know and I'll get those up. I really need to sell this car so please ask any questions you might have. Thanks for looking.

LT!freak94 03-29-2005 05:55 PM

you do know that the pic of the motor is upside down right

Ian 03-29-2005 06:34 PM

Quote:

Originally Posted by LT!freak94
you do know that the pic of the motor is upside down right

yeah it runs better that way. :lol: . No I had no idea, but I'm too lazy to fix it.

Anti_Rice_Guy 04-05-2005 09:44 AM

what engine and mods?

Ian 04-05-2005 12:22 PM

Its a 355 with the following mods.
214*/224* summit cam
pocket ported heads (not sure what they're from)
2.02 and 1.60 valves with 3 angle valve job
Performer RPM intake
Holley carb (i think its a 750)
Forged pistons
guide plates
hedman headers
Flowmaster american thunder exhaust

TH-350 trans with the following mods.
B&M shift kit (stage 2)
B&M 2200 stall converter
New front pump seal

Rear end:
8.5 inch ten bolt
Posi
Richmond 3.90 gears
Traction bars


those are that only mods I can think of right now, there may be more though.

Anti_Rice_Guy 04-05-2005 05:48 PM

2 questions...
still for sale?
does it run?
i'm gonna have to talk to my dad about maybe getting this for me...
where do you live?

Ian 04-05-2005 06:00 PM

Quote:

Originally Posted by Anti_Rice_Guy
2 questions...
still for sale?
does it run?
i'm gonna have to talk to my dad about maybe getting this for me...
where do you live?

As of this moment, it is still for sale.

And yes, it does run, but it could stand to have the carb tuned.

I live in Hillsborough, its in somerset county kinda near princeton.

Anti_Rice_Guy 04-05-2005 06:14 PM

i'll have to talk to my dad about htis...since he would have to loan me the money right now.
and that still doesn't help me...i dont really know where too many places are....
i live in Long Valley.

Untamed 04-05-2005 11:28 PM

Long Valley is about 45 minutes away. Shoot down to 78, head east, jump onto 287 south, then off route 206 south. Head all the way down to Hillsborough.

No easy way to get to 78 from Long Valley, however you can go down 519 (I think) through High Bridge, then south on 31 to 78.

Ian 04-06-2005 05:54 AM

If you want to mapquest it, my address is:

6 Woodmere Drive
Hillsborough New Jersey, 08844

Ian 04-06-2005 08:14 PM

Update. Car is sold 8).

j0n 04-06-2005 08:22 PM

who bought it? how much?

if you dont mind my asking

Ian 04-06-2005 08:42 PM

I sold it for 2 grand. Now I only owe my mom 300 bucks. 8)


All times are GMT -5. The time now is 08:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.