|
I dont know about changing rockers while the engine is IN the car but changing while the engine is out is easy. All you really gotta do is pop off the valve covers, unbolt the old ones, pull them off. and torque the new ones down to 11 ft. lbs (on the 18-87 5.0 and 86-87 5.7). Then just put the valve covers back on and fire it up.
Oh and double check the torque settings before doing it.
It should take more than an hr.
__________________
Quote:
|
Originally Posted by The Fapist
K0ll is a hick and has a veritable fleet of 1980-early 90's GM vehicles :mullet:
|
|