|
boxing in teh arms is easy as hell.
step 1: go to lowes and get 1/8thick, 36inch long, 1.5inch wide strap steel
step 2:cut the steel in half
step 3: put the stock arm upside down in a vise and prep teh rolled edge for welding
step 4: prep the edges of teh strap steel for welding
step 5: c-clamp the steel down to the control arm with the arm squeezed slightly in teh vise
step 6: lay at least 3 beads of weld on each side to hold the strap steel to the arm.
it is really easy to do and shoudl only take about 15mins per arm. for an extra added and helpful step you can get a set of poly bushings to install after you do the welding.
later
tim
|