Quote:
|
Originally Posted by deadtrend1
The new belt you can get at any parts store, you just need to know what size to get.
Depending on the pulleys you get, you can run a string or something to get the approximate size you need. I believe the two piece March underdrive setup (Alternator/Crank) requires a 59 inch belt. SO you would need Dayco number 590K6.
590 = 59.0 inches k6=6 rib
If you just get the March crank pulley only, then I think its a 59.5 inch belt. So 595K6 would be the Dayco part number on that.
|
those are old dayco numbers as far as i know, at my work its 50xxxxx...5060590 would be 6 groove 59 inch belt...5060595 would be 59.5...5070590 would be 7 groove 59 inch.. and so on