|
The Excel 8.8mm 300+ wires for the LT1 will fit in the stock wire holders with a little dremel work. I used them for years without any problems.
I don't think the Taylor or MSD wires will because they are allot thicker.
If you want to run the thicker wires your better off going with as over the valve conversion set-up so you don't have to worry about burning the wires.
__________________
93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada
1) Build it
2) Race it
3) Break it
4) Repeat!!!
|