NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

ins0mnia24 · 08-22-2005, 05:36 PM

Oh sorry Kane i forgot to mention if you do try your car in every gear and drive at the same speed, it will be the driveshaft if all gears make the noise.Try driving the car around the block a few times turning right and left but only slowing down a little to make the turns sometimes a defective differential will make clicking noises while your coasting during turning And also check the tranny mounts with by prying on the tranny a little to see if it moves, check to see if the dust cover on the yoke isnt rubbing on the transmission. Also make sure the driveshaft is clean. Oh sometimes they use weights on the driveshaft to balance it, though i've never actually seen it on a f-body but i have heard of it happening where a weight will fall off the driveshaft and throw it off balance. but i have never seen one on a f-body but a friend had that problem with his blazer

08-22-2005, 05:36 PM	#9
ins0mnia24 Join Date: Aug 2005 Location: Millville & Little ferry New Jersey Posts: 454 iTrader: (2)	Oh sorry Kane i forgot to mention if you do try your car in every gear and drive at the same speed, it will be the driveshaft if all gears make the noise.Try driving the car around the block a few times turning right and left but only slowing down a little to make the turns sometimes a defective differential will make clicking noises while your coasting during turning And also check the tranny mounts with by prying on the tranny a little to see if it moves, check to see if the dust cover on the yoke isnt rubbing on the transmission. Also make sure the driveshaft is clean. Oh sometimes they use weights on the driveshaft to balance it, though i've never actually seen it on a f-body but i have heard of it happening where a weight will fall off the driveshaft and throw it off balance. but i have never seen one on a f-body but a friend had that problem with his blazer __________________ 2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E. QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn. Cartek Tuned...