|
the housing, axles, and brake mounting plates all interchange on 4th gen rears.
that means the V6 housing will be fine. just unbolt the drum brake hardware and pop the disc brake stuff on. the V6 and V8 cars use the same axles, so jsut re-use the V6 pieces if you know they are good and aren't 100% sure of the LT1 rear axles.
only thing you have to watch out for is the ABS. check if you need 3 channel(1 sensor in the top of the center section) or 4channel(sensors at teh end of each tube) before you swap.
|