NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 12-18-2005, 02:53 PM

The problem will be that the rear is only located by the TQ arm and LCA on the other side. You'll need to support the body with jackstands, and use the jack itself to push the rear up into position. Then swing the LCA into the slot and pop the bolt through.

Good luck! Too bad I didn't catch this earlier, I woulda driven up there to help.

12-18-2005, 02:53 PM	#18
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	The problem will be that the rear is only located by the TQ arm and LCA on the other side. You'll need to support the body with jackstands, and use the jack itself to push the rear up into position. Then swing the LCA into the slot and pop the bolt through. Good luck! Too bad I didn't catch this earlier, I woulda driven up there to help. __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...