Ok, 2 part question. First off, will this setup work. IE No problems bolting right up.
Second part. Car is a 91 Trans Am Vert with 350 TPI From 89. Stock except for Exhaust and a custom chip.
Parts :
Cam : "XFI" 292 Hydraulic Roller Camshaft Lift: .584"/.579" w/1.6 Rockers Duration: 292°/300°
Intake : LT1 converted intake from LT1intake.com
Heads :
SBC Pro Series Aluminum Cylinder Heads
The heads are the biggest problem. They are 23*. Stock is 18 if I remember. Am I going to run into a problem?