NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - 350 sbc roller longblock .040" over (1 piece rms) $250

V · 01-04-2006, 01:37 AM

I had this laying around as a spare, now i need it gone, heads are off it so you can check the cylinders. it has already been bored out and has .040 pistons in it. was used, i was going to hone it, re-ring it and throw in new bearings and gaskets and put it on my monte if the present motor was no good, but my motor was great so now this spare is not needed. Comes with centerbolt valve covers, timing cover, oil pan, oil dipstick, head bolts. NO valvetrain though. This was a TPI roller cam motor. $250 obo

01-04-2006, 01:37 AM	#1
V Stalker Join Date: Aug 2004 Posts: 12,082 iTrader: (12)	350 sbc roller longblock .040" over (1 piece rms) $250 I had this laying around as a spare, now i need it gone, heads are off it so you can check the cylinders. it has already been bored out and has .040 pistons in it. was used, i was going to hone it, re-ring it and throw in new bearings and gaskets and put it on my monte if the present motor was no good, but my motor was great so now this spare is not needed. Comes with centerbolt valve covers, timing cover, oil pan, oil dipstick, head bolts. NO valvetrain though. This was a TPI roller cam motor. $250 obo