NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

V · 01-10-2006, 12:24 AM

alright, i happened the measure the axles tonight, g body was like 27.75 and 4th gen was about 30", wouldnt a 3rd gen rear be 4" narrower, so each axle should be 2" shorter. if thats correct the 3rd gens should be 28" just about but not, dahm lol... anyways..

now i need 2 posi units, lol. my 94 z28 could use one. I was forced to destroy the oem one to try to get the axle out(which im still working on) the rear bent and bent the axle as well, gettign it wedged in the carrier, only way to get the c clip off was too trash the posi. i tried every other way. but there was so much crap and all in the pumpkim is was probably damaged anyway. for now i'll just run an open rear.

01-10-2006, 12:24 AM	#12
V Stalker Join Date: Aug 2004 Posts: 12,082 iTrader: (12)	alright, i happened the measure the axles tonight, g body was like 27.75 and 4th gen was about 30", wouldnt a 3rd gen rear be 4" narrower, so each axle should be 2" shorter. if thats correct the 3rd gens should be 28" just about but not, dahm lol... anyways.. now i need 2 posi units, lol. my 94 z28 could use one. I was forced to destroy the oem one to try to get the axle out(which im still working on) the rear bent and bent the axle as well, gettign it wedged in the carrier, only way to get the c clip off was too trash the posi. i tried every other way. but there was so much crap and all in the pumpkim is was probably damaged anyway. for now i'll just run an open rear.