NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

198esp1 · 01-27-2006, 05:42 PM

you can use the stock spring in the rear and just remove the rubber. about 3/4 inch lower than stock.In the front Keep the stock front spring get the koni's and use the lower snap ring groove. about 1 inch lower. If you go any lower wheel travel becomes an issue and also bump steer. Unless you are looking to race keep the soft spings upgrade the sway bars, then shocks.

01-27-2006, 05:42 PM	#19
198esp1 Join Date: Dec 2005 Posts: 396 iTrader: (2)	springs you can use the stock spring in the rear and just remove the rubber. about 3/4 inch lower than stock.In the front Keep the stock front spring get the koni's and use the lower snap ring groove. about 1 inch lower. If you go any lower wheel travel becomes an issue and also bump steer. Unless you are looking to race keep the soft spings upgrade the sway bars, then shocks.