NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

HardcoreZ28 · 03-17-2006, 09:40 PM

clean the rotors with simple green and water followd by brakeclean after that to keep them from squeaking on you. Get some caliper lube for the caliper bolts. You're going to need the correct hex bit for the caliper bolts also...any parts store should have it. You'll also need a big set of channel locks or a pad spreader. That should be about it. It's about a 40 minute job.

03-17-2006, 09:40 PM	#2
HardcoreZ28 Join Date: Aug 2004 Location: Hillsborough, NJ Posts: 2,630 iTrader: (1)	clean the rotors with simple green and water followd by brakeclean after that to keep them from squeaking on you. Get some caliper lube for the caliper bolts. You're going to need the correct hex bit for the caliper bolts also...any parts store should have it. You'll also need a big set of channel locks or a pad spreader. That should be about it. It's about a 40 minute job. __________________ --==RPM Resto & Custom==-- 1989 IROC-Z Media Coverage: Chevy High Performance - Readers Rides 4/03 GM High Tech Performance - Tech Article 3/06 Chevy Rumble - Tech & Feature Articles November 2006 Auto Restorer Magazine - Feature Article 5/11 SkinAndSteel.com