NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Tall Valve Covers with 3rd Gen Serpentine Brackets?

The Fixer · 05-15-2006, 11:03 AM

Hey all,
I'm using Harland Sharp 1.5 aluminum full roller rockers with my ZZ4 cam, and it ~appears~ that I'm going to run into some clearance problems inside the valve covers. I put one cover on the other day, and could feel it wouldn't sit flush on the head; it's either hanging up on those big-ass polylocks, or the end above the pushrod.

Has anyone here been able to fit tall valve covers with the stock '88-'92 serpentine belt setup??

05-15-2006, 11:03 AM	#1
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	Tall Valve Covers with 3rd Gen Serpentine Brackets? Hey all, I'm using Harland Sharp 1.5 aluminum full roller rockers with my ZZ4 cam, and it ~appears~ that I'm going to run into some clearance problems inside the valve covers. I put one cover on the other day, and could feel it wouldn't sit flush on the head; it's either hanging up on those big-ass polylocks, or the end above the pushrod. Has anyone here been able to fit tall valve covers with the stock '88-'92 serpentine belt setup?? __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...