|
well u dont have a block or cyl heads,als u have is an intake and a useable cam.Pistions,rings,bearings,gaskets,oil pump will run about 500 for a speedpro/trw kit.add in the cost of a block+any machine work,and ur still gonna need a set of heads,and whatever work needs to freshen up a set of heads,ur looking at 1,500-2,000+ to build a very mild 350 only cause u dont have a rebuildable 350 core,and if ur gonna use the stock crank u might as well just use hyperetic pistions.
__________________
#1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS
268 rwhp & 367.6 ftlbs @ 10 psi 3.1l
12.30's @ 112 3.1L @ 9 psi
??.?? @ ???? 3.0L @ 18 PSI
|