View Single Post
Old 08-28-2006, 05:41 AM   #14
conlinj
 
Join Date: May 2005
Location: Rockledge
Posts: 64
iTrader: (1)
Start with the basics,

Check the tps see what volts its at. While you have your multi-meter out check the ohms on your injectors. Double check your firing order a wire could be misplaced. Check your wiring to your o2 sensor make sure it didn't melt anywhere. Another thing to look for is pop the hood at night and run the car, look for any blue sparks you could have a bad wire and it's arching. Get a spray bottle and fill it with some water, spray around the tpi gaskets and see if the rpm's drop, could have a vacuum leak somewhere.


-Jim
__________________
conlinj is offline   Reply With Quote