NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

project89 · 09-03-2006, 12:01 AM

hey im selling a motor to wayfast,i got him all the part numbers for everything,but i cant figure out which cam to have him get
motor specs are
350 4 bolt main .030 over
hyperectic flattop pistions .030 over 9.73-1 cr
bowtie raised port heads - fully ported 2.02/1.60 stainless manley valves,comp locks retianer springs,1.5 ratio rockers
port matched victor jr intake 2,500-8k range
holley 750 dp
110gph fp
with that intake hell have to spin that motor up pretty high
so i gave him a choice of these 3 cams
voodo 227/233@.050 489/504 int/ex LUN-60103LK 1,800 to 6,200 rpms
voodo 241/249 .525/546 int/ex lun-60105lk 2000-6,800 rpms
edelbrock 232/234 .488/.488 int/ex edl-5002
what ya think,come up with a better cam choice?
btw they are hydralic cams

09-03-2006, 12:01 AM	#1
project89 Join Date: Mar 2006 Location: sayreville nj Posts: 2,175 iTrader: (0)	cam suggestion hey im selling a motor to wayfast,i got him all the part numbers for everything,but i cant figure out which cam to have him get motor specs are 350 4 bolt main .030 over hyperectic flattop pistions .030 over 9.73-1 cr bowtie raised port heads - fully ported 2.02/1.60 stainless manley valves,comp locks retianer springs,1.5 ratio rockers port matched victor jr intake 2,500-8k range holley 750 dp 110gph fp with that intake hell have to spin that motor up pretty high so i gave him a choice of these 3 cams voodo 227/233@.050 489/504 int/ex LUN-60103LK 1,800 to 6,200 rpms voodo 241/249 .525/546 int/ex lun-60105lk 2000-6,800 rpms edelbrock 232/234 .488/.488 int/ex edl-5002 what ya think,come up with a better cam choice? btw they are hydralic cams __________________ #1 1989 RS - 3.0L V6 11.0-1 CR, LIGHTENED CRANK,J.E FORGED PISTONS, CUSTOM 280/284 .575/.575 116LSA ROLLER CAM, PORTED HEADS, PORTED INTAKE,CUSTOM TURBO KIT W/ BW S475,AW INTERCOOLER,METHANOL INJECTION, TCI STREETFIGHTER 700R4 W/ TCI 4,500 STALL,TWIN WALBORO 255'S & 83# INJECTORS 268 rwhp & 367.6 ftlbs @ 10 psi 3.1l 12.30's @ 112 3.1L @ 9 psi ??.?? @ ???? 3.0L @ 18 PSI Last edited by project89; 09-03-2006 at 12:06 AM.